Command Protocol Reference Guide
A - 81
Description
This parameter indicates the status of the VoIP plug-in card. The three values
correspond to the state of the status LED on the VoIP plug-in card as follows:
ok = solid, booting = flashing.
voip_transfer
Transfer a Calll
Description
This parameter is used to transfer a call.
voip_uc_sw_ver
Get the UC Software Versionl
Virt Chans Mono
Values booting : The VoIP card is booting
ok : The VoIP card has booted and is operational
Event Source No
Argument Argument value
Argument Argument value
Channel Type Virtual Channel
Value Type Void
Read/Write Mode Write-Only
Phys Chans VoIP Telephony Output
Virt Chans Mono
Event Source No
Argument Argument value
Channel Type Virtual Channel
Value Type String
Read/Write Mode Read-Only
Phys Chans VoIP Telephony Output
Virt Chans Mono
System Limits Max String Length : 256
Event Source No
To Next Page
Loading...
Need help?
General
