PN-0908073 Rev. 11 15-92
PS 164-2
THE ART OF WELDING
3. 4. Technical characteristics
Mains power input
Single phase + earth
220/230 V ± 10 %
50 or 60 Hz
Current rating 16 A
Open circuit voltage 60 V
Insulating class F
Enclosure class IP 23
Welding current range
Range 160 A: 4 to 160 A
Range 50 A: 4 to 50 A
Regulation of intensity ± 1 % when I > 100 A and ± 1 A when I ≤ 100 A
Duty cycle
160 A to 40 %
100 A to 100 %
Range of pulsation
Range 160 A: 4 to 160 A
Range 50 A: 4 to 50 A
Time from 10 to 9999 ms
Motor controls
Torch rotation
Wire feeder
Accuracy of movements
± 1 % for Vp ≥ 250 (Vp=programmed speed)
± 4 for Vp < 250
Gas controls Torch gas, backing gas (option)
Power source cooling Forced ventilation
Welding torch cooling
By cooling liquid in closed circuit with fl ow safety
valve
Display of actual values during the weld cycle
Permanent display of the arc voltage and the welding
current
Storage of "User’s" programs 16 maximum
Presetting program library 60
Sectors per program 10 maximum
Storage and loading Memo chip card
Dimensions 660 x 320 x 465 mm
Weight 34 kg
Standards EN 60974-1 and EN 60974-10
To Next Page
Loading...
