2-92 PN-0908073 Rev. 11
PS 164-2
THE ART OF WELDING
Review of document
Rev. 0 Original document.
Rev. 1 Update following to review process.
Rev. 2 Addition of new graphic style guide FNCA 1009-012 + FNCA 1012-015 (PLE - 12/2010)
Rev. 3 Addition of information about coolant levels on page 64 (PLE - 07/2011)
Rev. 4 Addition of information about “R40 = Selection of wire feeder” on page 42 (PLE - 09/2011)
Rev. 5 Update for FNCA 1101-39 on page 18 + Shunt of coolant circuit on page 20 + FNCA 1201-013
(Remote control reference) + FNCA 1201-020 relay reference 12VDC on page 71 (PLE 02/2012)
Rev. 6 Addition Quick connector gas input 06/2012
Rev. 7 Update for FNCA 1208 026 pages 61-62 (09/2012)
Rev. 8 Update quick connector refrences FNCA 1211-071 (01/2013)
Rev. 9 Update «Servicing, maintenance and troubleshooting» 12/2014
Rev. 10 Update «Servicing, maintenance and troubleshooting» 09/2015
Rev. 11 Update : Chapters " Ulternating use of at two welding stations on the same workpiece"
To Next Page
Loading...
