Need help?Do you have a question about the Pool Warehouse SUNRAY and is the answer not in the manual?
General| Brand | Pool Warehouse |
|---|---|
| Model | SUNRAY |
| Category | Swimming Pool |
| Language | English |
Key safety rules for pool usage, including supervision, prohibited activities, and hazard awareness.
Guidelines for selecting a suitable, level, and well-drained location, avoiding hazards.
Diagram showing pool components with key numbers for identification during assembly.
Detailed list of all pool parts, quantities, and part numbers required for installation.
Instructions for choosing the correct ground preparation drawing based on pool size.
Steps to mark the pool's perimeter and centerlines using stakes, string, and spray paint.
Process for removing sod, leveling the ground, and placing corner stakes for the pool base.
Guidance on locating and digging trenches for buttress supports along the pool perimeter.
Overview of hardware and assembly steps for buttresses, straps, uprights, and diagonals.
Steps for preparing straps, installing diagonal brackets, and attaching them to the buttresses.
Instructions for installing upright columns onto the base plate and connecting them to the pool wall.
Guidance on installing diagonal braces, ensuring they lock into upright slots and connect to brackets.
Instructions for filling hold-down plates and verifying buttress alignment before proceeding.
Final steps to remove temporary stakes and ensure the pool area is properly marked.
Guide to selecting and installing the correct curved bottom rails based on pool size and color code.
Instructions for spreading and leveling fine brick sand or stabilizer for the pool foundation.
Steps for setting the pool wall in place, uncoiling, and aligning it on the foundation.
Procedure for securely joining the two ends of the pool wall using steel bars and fasteners.
Creating a protective cove at the base of the wall to secure the liner and prevent creeping.
Unfolding, positioning, and securing various liner types (overlap, V-bead, snapbead) to the pool wall.
Steps for attaching vertical columns and top ledges to the pool wall and filling the pool partially.
Final steps to fill the pool with water, ensuring the liner is smooth and free of creases.
To Next Page