BIOS Setup Information
RUBY-9715VG2AR User’s Manual 4-10
Hyper-Threading Technology
“Enabled” for Windows XP and Linux 2.4.X (OS optimized for Hyper-Threading
Technology and “Disabled” for other OS (OS not optimized for Hyper-Threading
Technology).
The choice: Enabled, Disabled.
Quick Power On Self Test
Allows the system to skip certain tests while booting. This will decrease the time
needed to boot the system.
Enabled Enable quick POST
Disabled Normal POST
First/Second/Third Boot Device
Select your boot device priority.
The choice: Floppy, LS120, Hard Disk, CDROM, ZIP100, USB-FDD, USB-ZIP, USB-
CDROM, LAN and Disabled.
Boot Other Device
Select your boot device priority.
The choice: Enabled, Disabled.
Swap Floppy Drive
If the system has two floppy drives, choose enable to assign physical driver B to
logical drive A and Vice-Versa.
The choice: Enabled, Disabled.
Boot Up Floppy Seek
Enabled tests floppy drives to determine whether they have 40 or 80 tracks.
The choice: Enabled, Disabled.
Boot Up NumLock Status
Select power on state for NumLock.
The choice: Off, On.
Downloaded from StockCheck.com
To Next Page
Loading...
