Portwell RUBY-9715VG2AR - Product Specification

System Overview
RUBY-9715VG2AR User’s Manual 1-3
1.3 Product Specification
 Main processor
- Intel
®
Pentium
®
D / Pentium
®
4 / Celeron D Processor
- FSB: 1066/800/533MHz
 BIOS
Phoenix (Award) system BIOS with 4Mb Flash ROM with easy upgrade function
ACPI, DMI, Green function and Plug and Play Compatible
 Main Memory
- Support dual-channel & signal channel DDR2 memory interface
- Non-ECC, non-buffered DIMMs
- Four DIMM sockets support 667/533/400 DDR2-SDRAM up to 4GB System
Memory
 L2 Cache Memory
Built-in Processor
 Chipset
Intel
®
945G GMCH and ICH7-R chipset
 Expansion Capabilities
- One PCI Express x16 bus add-in card connector that comply PCI Express
Revision 1.0a
- Six PCI Conventional bus connectors that comply PCI Local Bus Specification
Revision 2.3
- Four proprietary PCI Express x1 bus add-in card connectors
 IDE Interface
Support one enhanced IDE channel up to two HDD devices with PIO mode 4 and
Ultra DMA/33/66/100 mode transfer and Bus Master feature
 SATA Interface
- Four Serial ATA 300 interfaces
- Intel 82801GR I/O Controller Hub (ICH7-R) for RAID support (levels 0, 1, 0+1
and 5) on the SATA interface
 Floppy Drive Interface
Support one FDD port up to two floppy drives and 5-1/4"(360K, 1.2MB), 3-1/2"
(720K, 1.2MB, 1.44MB, 2.88MB) diskette format and 3-mode FDD
 Serial Ports
Support two high-speed 16C550 compatible UARTs with 16-byte T/R FIFOs
 IR Interface
Support one 6-pin header for serial Standard Infrared wireless communication
 Parallel Port
Support one parallel port with SPP, EPP and ECP modes
 USB Interface
Support eight USB (Universal Serial Bus) 2.0 ports for high-speed I/O peripheral
devices (four internal; four external)
StockCheck.com
Downloaded from StockCheck.com