Portwell RUBY-9715VG2AR - Advanced BIOS Feature

BIOS Setup Information
RUBY-9715VG2AR User’s Manual 4-7
The following options are selectable only if the ‘IDE Channel 2 Slave’ item is set to
‘Manual’
Cylinder Min = 0
Max = 65535
Set the number of cylinders for this hard
disk
Head Min = 0
Max = 255
Set the number of read/write heads
Precomp Min = 0
Max = 65535
**** Warning: Setting a value of 65535
means no hard disk
Landing zone Min = 0
Max = 65535
****
Sector Min = 0
Max = 255
Number of sectors per track
4.5 Advanced BIOS Feature
This section allows you to configure your system for basic operation. You have the
opportunity to select the system’s default speed, boot-up sequence, keyboard
operation, shadowing and security.
Phoenix- AwardBIOS CMOS Setup Utility
Advanced BIOS Features
Item Help
f CPU Feature [Press Enter]
f Hard Disk Boot Priority [Press Enter]
Virus Warning [Disabled]
CPU L1 & L2 Cache [Enabled]
Hyper-Threading Technology [Enabled]
Quick Power On Self Test [Enabled]
First Boot Device [Hard Disk]
Second Boot Device [CDROM]
Third Boot Device [Floppy]
Boot Other Device [Enabled]
Swap Floppy Drive [Disabled]
Boot up Floppy Seek [Disabled]
Boot up NumLock Status [On]
Gate A20 Option [Fast]
Typematic Rate Setting [Disabled]
X Typematic Rate (Chars/Sec) 6
X Typematic Delay (Msec) 250
Security Option [Setup]
X APIC Mode Enabled
MPS Version Control For OS [1.4]
Small Logo(EPA) Show [Disabled]
Menu Level f
↑↓→←: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
StockCheck.com
Downloaded from StockCheck.com