Posch SplitMaster 30 - Page 21

▪ Lower the lifting device by hand until it is held by the lifting cylinder.
▪ Pull the control lever for the lifting device until the lifting device moves downwards.
Transport position:
▪ Press the control lever, the lifting device swings upwards.
▪ Swing the lifting device further upwards by hand until the securing wedge engages.
▪ Immobilise the securing wedge with the spring pin.
Operation:
II
I
Position "I"
When the control lever is placed in position "I", the lifting device moves upwards.
Position "II"
When the control lever is placed in position "II", the lifting device moves downwards.
Operation
21