▪ Turn off the machine.
– See:Switching off the machine [➙ 28]
▪ Pull out the spring pin and move the shut-off rod to the desired position.
▪ Then secure the shut-off rod again with the spring pin.
The splitting stroke is defined using the following lengths:
Position Log length
1st position 60 cm
2nd position 85 cm
3rd position 110 cm
Shut-off rod removed 50 - 125 cm
Timber support
1 Release bolt 2 Timber support
The wood does not fall to the ground after splitting due to the timber support.
1. Position the splitting blade as high as it will go.
2. Push the release bolt to the right and swing the timber support into its working position.
Splitting process
Only one person may operate the machine at a time.
Ensure that no other people are in the vicinity of the machine.
5.6
5.7
Operation
24
To Next Page
Loading...
