EC Declaration of Conformity
We hereby declare that the following machine, its design and manufacture, comply with the
health and safety requirements of the EC Machinery Directive 2006/42/EC.
The machine furthermore complies with the EC Low Voltage Directive 2006/95/EC and the
EC Electromagnetic Compatibility (EMC) Directive 2004/108/EC.
This Declaration is not valid for any modifications to the machine which are not approved
by us.
Wood splitter - SplitMaster 30
Item no.:
M6652, M6652S, M6662, M6667, M6667S, M6672, M6672S
Serial no.: from 1,001,001A
To implement the health and safety requirements mentioned in the EC Directives, the
following standards are applied:
▪ EN ISO 12100 Safety of machinery - Basic concepts, general principles for design
▪ EN ISO 13857 Safety distances to prevent hazard zones being reached by upper and
lower limbs
▪ EN 349 Minimum gaps to avoid crushing of parts of the human body
▪ EN 60204-1 Electrical equipment of machines
▪ EN 609-1 Safety of log splitters
▪ EN 574 Two-hand control devices
▪ EN ISO 4413 Safety requirements - Hydraulics
Internal measures ensure that this series of devices always complies with the requirements
of the EC Directives and the applied standards.
Below is the name and address of the person who signs the above EC Declaration of
Conformity and is authorised to compile the technical documentation.
Leibnitz, date:
05.01.2010
Posch
Gesellschaft m. b. H.
Paul-Anton-Kellerstrasse 40
8430 Leibnitz, Austria
Ing. Johann Tinnacher
Managing Director
EC Declaration of Conformity
49
To Next Page
Loading...
