Put out of operation
Before switching off the machine, depressurise all hydraulic functions
by placing all control levers in the neutral position.
Switching off the machine
Driven by electric motor (Type E)
Type E7.5
▪ Move the switch to the 0 position.
▪ Switch off the master switch (on the plug).
Type E15
▪ Move the switch to the 0 position.
▪ Switch off the master switch (on the plug).
Driven by tractor via universal joint shaft (type PZG)
▪ Disengage the universal joint shaft on the tractor.
– Before disengaging, turn the manual throttle to minimum.
Powered by diesel engine (type D)
▪ Set the diesel engine to idle and let it run for a few minutes to allow the engine to cool
down, then switch it off (see engine operating instructions).
6
6.1
Put out of operation
28
To Next Page
Loading...
