EasyManua.ls Logo

Posch SplitMaster 30 - Diesel Engine; Cleaning

Posch SplitMaster 30
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Oil filter
1
2
1 Filter cover 2 Filter insert
The filter insert should be changed every time the oil is changed.
Any aluminium particles can be disregarded, as these occur when the pump is running in.
Do not wash out the filter insert with petrol or paraffin products, as these damage it.
Diesel engine
For maintenance operations, refer to the engine operating instructions.
Cleaning
Before cleaning work on the machine, it is vital to switch off the drive and secure it so it
cannot be switched on accidentally or started-up by unauthorised persons.
Disconnect the machine from the mains.
In addition, pull out the plug of the device.
Disengage the universal joint shaft on the tractor.
Before disengaging, turn the manual throttle to minimum.
Remove the universal joint shaft from the tractor.
Clean the machine regularly to ensure proper operation.
Only wash new machines (during the first 3 months) with a sponge.
The paint is not yet completely set, so cleaning with a high pressure cleaner may
damage the finish.
9.2.2
9.3
9.4
Maintenance
35

Related product manuals