1. DISPLAY UNIT AND CONTROL KEYPAD
1.1. Keypad Unit Description
The display of the SD700FR is removable for remote installation, as the illustration shows. There are
three leds on the display which indicate the drive operational status, one LCD screen with 4 lines of
16 characters each and keys for control and parameter setting.
Figure 1.1 Display Unit and Keypad
1.1.1. LEDs for Status Indication
Leds offer an easy method of identifying if the SD700FR is powered up, if the drive is supplying
output voltage, or if the drive has tripped.
Led ON: Yellow colour. When it is lit, indicates equipment is powered up.
Led RUN: Green colour. When it is lit, indicates the motor is powered by the SD700FR.
Led FAULT: Red colour. When it is blinking, indicates the equipment is in fault status.
Figure 1.2 Status Visualization
To Next Page
Loading...