Page 6 of 80 Instruction Manual for AURORA CDD BCG.00613_AA
Part 1 Introduction and Safety
1.2.3.1 Nameplate
The nameplate attached to the equipment must NOT be removed, damaged, stained, hidden, etc.
They are not to be hidden with external objects or parts such as rags, boxes, or other such
equipment. They should be cleaned periodically and always maintained in view.
The nameplate shown below is affixed to the device and provides the following information:
Figure 1- 1: AURORA CDD Nameplate
Besides the label showing the CDD nameplate data, an additional product identification label is also
present. The label displays the following information:
CDD Part Number
CDD Serial Number
Week/year of manufacture
WIFI communication MAC address
RF(radio frequency) communication MAC
address
When registering the CDD on the AURORA Easy View portal, you will use the MAC RF (radio
frequency) address as the product identification code (see Operations, Part 4).
Technical data reported in this manual does not, however, replace the data mentioned on the labels
affixed to the equipment.
To Next Page
Loading...
