Page 8 of 80 Instruction Manual for AURORA CDD BCG.00613_AA
Part 1 Introduction and Safety
IMPORTANT SAFETY INSTRUCTIONS!
SAVE THESE INSTRUCTIONS – KEEP IN A SAFE PLACE!
1.3 SAFETY
1.3.1 WARNINGS IN THIS DOCUMENT
This is a list of special safety symbols used in this manual that highlights potential safety risks
and/or useful information. The symbol usage is described below:
DANGER:
Indicates a hazardous situation that can result in deadly electric shock hazards,
other serious physical injury, and/or fire hazards.
WARNING:
Indicates directions which must be fully understood and followed in entirety in
order to avoid potential safety hazards including equipment damage, or personal
injury.
CAUTION:
This points out that the examined area must not be entered or that the described
operation must not be carried out. The reader should stop, use caution and fully
understand the operations explained before proceeding.
UL60950-1 Safety of Information Technology Equipment – General Requirements:
Part 1
CSA 60950-1-07 Safety of Information Technology Equipment – General
Requirements: Part 1
The equipment has various labels. Those with a yellow background refer to safety concerns. Be sure
to read all labels before beginning installation of the equipment. If any questions arise as to the
meaning or intent of these notices, please contact Power-One Technical Support at 877-261-1374.
1.3.1.1 General Installation Warnings
The AURORA CDD is designed and tested according to international safety requirements; however,
certain safety precautions must be observed when installing and operating this inverter. Read and
follow all instructions, cautions and warnings in this installation manual.
WARNING:
The equipment must be installed indoors in rooms with suitable environmental
conditions (see technical characteristics in the Appendix).
DO NOT install outdoors!
To Next Page
Loading...
