Page 5 of 80 Instruction Manual for AURORA CDD BCG.00613_AA
Part 1 Introduction and Safety
1.1 FOREWORD
This manual contains important instructions for models indicated on the front cover that shall be
followed during installation and maintenance.
THE INSTALLER MUST READ THIS DOCUMENT IN ITS ENTIRETY BEFORE INSTALLING OR
COMMISSIONING THIS EQUIPMENT.
1.2 INTRODUCTION
1.2.1 PURPOSE
This operating and maintenance manual is a valid guide that will enable users to work safely, install
the AURORA® CDD (Concentrator Data Device)and carry out the operations necessary for keeping
the equipment in good working order.
1.2.2 TARGET GROUP
The installation is to be done by qualified installers: a licensed electrician or contractor who knows
and understand the National Electric Code and according to the applicable local code regulations
(wiring rules and other).
1.2.3 VALIDITY AND AVAILABLE VERSIONS
The AURORA CDD described in this manual is available in a single version suitable for all countries
of installation. The device can be associated with the following equipment from Power-One:
AURORA MICRO ® Inverter
0.25 kW
MODELS
MICRO-0.25-I-OUTD-US-208/240
0.3 kW
MODELS
MICRO-0.3-I-OUTD-US-208/240
To Next Page
Loading...
