6
LiteMod 4HV User Guide
7
7 : 1.Welcome
Congratulations on your purchase of the Powersoft
LiteMod 4HV module.
We know you are eager to use the LiteMod module, but
please take a moment to read this user’s manual and safety
instructions. In case you have any questions, please do not
hesitate to contact your dealer or Powersoft.
The LiteMod 4HV is a four channel amplier modules
specically designed to drive high power loudspeakers.
The LiteMod 4HV represents an important evolution in
power amplier modules: extremely compact and light-
weight LiteMod 4HV can be easily integrated into any ap-
pliance such as active loudspeakers and stand alone rack
ampliers.
The new design of the power supply equipped
with PFC, reduces power consumption (less than 0.9
W in standby) while enhancing reliability and consist-
ency in all operating conditions. The high efciency
of the output stage improves overall performance
delivering pristine power and clean output signal.
A dedicated optional DSP board can be easily plugged to
the module providing a complete solution in a compact
package.
Powersoft LiteMod 4HV is the ultimate exible platform
suiting your application design.
7 : 2.Unpacking & checking for shipping damage
Your Powersoft product has been completely tested and
inspected before leaving the factory. Carefully inspect the
shipping package before opening it, and then immediately
inspect your new product. If you nd any damage notify the
shipping company immediately.
7 : 3.Disposal of the packing material
The transport and protective packing has been selected
from materials which are environmentally friendly for dis-
posal and can normally be recycled.
Rather than just throwing these materials away, please
ensure they are offered for recycling.
LiteMod 4HV | 1
To Next Page
Loading...
Need help?
General