Powerware 5125 - Environmental and Safety Specifications

Specifications
48
Powerware
®
5125 Two-in-One (2400–3000 VA) User’s Guide : www.powerware.com
Table 4. Technical Specifications
Low Voltage Models High Voltage Models
Operating Frequency 50/60 Hz, auto-sensing
Frequency Range 46–64 Hz
Noise Filtering MOVs and line filter for normal and common mode noise
Input Connections 12-ft, L5-30P power cord 12-ft, 16A IEC-309 power cord
PW5125 3000e and 3000g RM models:
16A, IEC 320-C20 input connector
Regulation
(Normal mode)
-10% to +6% of nominal voltage
Regulation
(Battery mode)
Nominal output voltage ±5%
Voltage Waveform Sine wave
Output Receptacles (1) L5-30R, (6) 5-15R (1) IEC 320-C19, (9) IEC 320-C13
Table 5. Environmental and Safety
Low Voltage Models High Voltage Models
Operating Temperature 0°C to 40°C (32°F to 104°F)
Optimal battery performance: 25°C (77°F)
Storage Temperature 0°C to 25°C (32°F to 77°F)
Transit Temperature -25°C to 55°C (-13°F to 131°F)
Relative Humidity 5–95% noncondensing
Operating Altitude Up to 2,000 meters above sea level
Transit Altitude Up to 15,000 meters above sea level
Audible Noise Less than 45 dBA Normal mode, typical load
Less than 50 dBA Battery mode
Surge Suppression ANSI C62.41 Category B (formerly IEEE 587), IEC 61000-4-5
Safety Conformance UL 1778, CAN/CSA C22.2, No. 107.1 UL 1778, CAN/CSA C22.2, No. 107.1;
EN 50091-1-1 and IEC 60950
Agency Markings UL, cUL UL and cUL; CE, TÜV-GS (model dependent)
EMC FCC Part 15, ICES-003, VCCI EN 50091-2, FCC Part 15, ICES-003