Powtran PI160 Series User Manual

Chapter 5 Function parameter
94
Chapter 5
Running
direction
Time(t)
... ...
E1.19
E1.00
E1.21
E1.01
E1.02
E1.14
E1.25
250ms Pulse
DO or RELAY output
E1.23
E1.20
E1.18
Figure 5-30:Schematic diagram of simple PLC
E1.17
Simple PLC power-
down memory
selection
Units digit
Power-down memory selection
11
☆
Power-down without memory
0
Power-down with memory
1
Tens digit
Stop memory selection
Stop without memory
0
Stop with memory
1
PLC "Power-Down With Memory" means that the PLC operating stage and frequency
before power-down are memorized, and then it will continue to run from the position of the
memorized stage in next power-on. If Power-Down Without Memory is selected, the PLC
process will restart from the starting position for each power-on.
PLC "Stop With Memory" means that the PLC operating stage and frequency before stop
are recorded, and then it will continue to run from the position of the recorded stage in next run.
If Stop Without Memory is selected, the PLC process will restart from the starting position for
each start.
E1.18
0 stage running time T0
0.0s(h) to 6500.0s(h)
0.0s(h)
☆
E1.19
0 stage ac/deceleration time
0 to 3
0
☆
E1.20
1 stage running time T1
0.0s(h) to 6500.0s(h)
0.0s(h)
☆
E1.21
1 stage ac/deceleration time
0 to 3
0
☆
E1.22
2 stage running time T2
0.0s(h) to 6500.0s(h)
0.0s(h)
☆
E1.23
2 stage ac/deceleration time
0 to 3
0
☆
E1.24
3 stage running time T3
0.0s(h) to 6500.0s(h)
0.0s(h)
☆
E1.25
3 stage ac/deceleration time selection
0 to 3
0
☆
E1.26
4 stage running time T4
0.0s(h) to 6500.0s(h)
0.0s(h)
☆

Powtran PI160 Series Specifications

General

Brand	Powtran
Model	PI160 Series
Category	Inverter
Language	English