Poynting RIPPLE - Page 8

Page 8 of 30
www.poynting.tech
Poynting Group (Pty) Ltd
Registration Number: 2014/239013/07
Rev 2.0
Step 3.
Open the front flap of the box by gently pulling it down from the top; as shown below:
Step 4.
4.1. Pull the side supports towards you, pulling them out of the packaging.
4.2. The Left side support will have a sticker saying, “Open here”. Pull the lid of the side
support up to open it; then proceed to take out your hex socket tool gift box; as shown
below: