Operation
EGM-4 Operator's Manual – Version 4.19
- 39 -
See Data Structure Based On Probe/Sensors on page 39.
Atmospheric pressure in millibars (mb)
Probe Type See 1REC on page 19 for more information.
Note. If there are no stored records, the message “NO MORE RECORDS IN STORE” will be
displayed before returning you to the main menu.
Data Structure Based On Probe/Sensors
Please note. The data structure, particularly columns A-H described above, is dependent
upon the probe/sensor that is connected to the EGM-4.
Description of Sensor
Connected
Each Column is described as follows
The EGM-4 is being used
Pin 1
0000
Pin 2
0000
Pin 3
0000
Pin 4
0000
Pin 5
0000
Probe or CH15T RH/T
0000
000.0
Temp.
000.0
Pin 5
0000
Probe
0000
000.0
Temp.
Temperature/PAR Probe
0000
0000
Temp.
(PMR-4/PMR-5)
0000
In
000.0
Out
000.0
0000
Chamber and CPY-2
Canopy Assimilation
0000
0000
Temp.
000.0
0000
0000
Rate
00.00
01/02/03
Rate
00=+
01 = -
00.00
Respiration Chamber
0000
Rate
0000
Temp.
000.0
0000
000.0
Rate
00.00
Multiplier
Rate
00=+
Assimilation Chamber
0000
Rate
0000
Temp.
000.0
0000
000.0
Rate
00.00
Multiplier
Rate
00=+
Assimilation Chamber
0000
Temp.
0000
Temp.
000.0
0000
0000
Rate
00.00
Rate
00=+
Further description of the data output is as follows:
GS (Stomatal Conductance)
2
CPY-2: g (CO
2
) m
2
Hour
-1
CPY-4: g (CO
2
) m
2
Hour
-1
2
-1