CO
....
ERCIAL
PRO
D U C T S
DIVISION
KEYS
ON
THE
DISPLAY
CONSOLE
The Precor treadmills have an easy-to-use keypad that is activated
by
the slightest
touch. Remind users that they only need to apply gentle pressure to these ultra-
sensitive keys.
Each key on the display console's keypad provides specific functions. Numeric keys
(numbered 1 - 0) let you enter data
in
answer to the display prompts and change the
speed during a workout. The standard keys, Change, Reset,
Incline
....
, Speed
Control
....
, and Enter, let you enter data as well as control your workout.
The following information explains the different uses of the keys from left to right.
To
locate each
key,
look at the display console or refer to Diagram 19.
Diagram
19
Displayconsole keypad.
Numeric
keys: Indicate course #,
time limit, or goal entries. During
a workout, use these keys
to
select a target Speed
or
Incline.
Quick
Start: Bypasses the remainin
Setup prompts and starts moving the
running belt. Smart
Rat~
is inactive and
default values apply.
Note:
The
CHANGE key
is
not shown in this diagram. Refer to Diagram
17
for its
location.
KEYPAD
TIPS
• Accurate entries are required or features such as Smart
Rate@
will not work
properly.
• Answer the Setup prompts using the numeric keys or by pressing
the'"
or •
keys.
• Press
Enter
to select the information being displayed.
•
Quick
Start
bypasses further selections and causes the running belt to start
moving. Default values apply (see
QUICK
START on page 30). The
Smart
Rate-
display
does
not appear.
• A time-out occurs during the Setup prompts if
the
treadmill detects
no
key
presses for 2 seconds. The display returns
to
the Precor banner.
• Press
Reset
to return to the Precor banner.
• The
Stop
key does
not
appear in Diagram 19, but its function is vital as
explained
in
this section.
page
28
To Next Page
Loading...
