Precor GEN06 Series User Manual

INFORMATION DISPLAY DESCRIPTION
Hrs).
U-BOOT SW The console Upper Boot software version information.
U-BASE SW The console Upper Base software version information.
METRICS BOARD SW The console Metrics board software version information
SER NUMBER
Displays the model and serial number of the machine. The
base serial number can be set using the WinCSAFE com-
puter software. The factory default is NONE.
USAGE LOG
Displays the type of workout programs the users are
accessing most frequently.
"Error Log & CPA Event Log"
on page95
Table of stored error event codes.
TIP: You can quickly access the Error log by holding down
the PAUSE key. Will show the STUCK KEY message
when there are no logged error codes.
(1) Only available on ASL equipped models.
(2) TRM800-14
1
, TRM700-16 models
1
TRM800 version 2 treadmills mfg. dates 2014 and later.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 25
4 Standard Service Menus
LED Console Standard Service Menus

Precor GEN06 Series Specifications

General

Brand	Precor
Model	GEN06 Series
Category	Treadmill
Language	English