EasyManuals Logo

Precor GEN06 Series User Manual

Precor GEN06 Series
153 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #37 background imageLoading...
Page #37 background image
MAINTENANCE
MENU DESCRIPTION
Recommended
Action menu
menu: Maintenance > Recommended Action
Range: None, Inspect
l None: No maintenance required.
l Inspect: Maintenance action required.
Used to report that there is a maintenance issue that requires
attention; it could indicate routine maintenance is due or that a
machine failure (error code) has occurred that required attention.
» Operating Condi-
tion
menu: Maintenance > Operating Condition
Range: Normal, Inspect
l Normal: No maintenance required.
l Inspect: There is a routine maintenance issue or failure con-
dition (error code) that requires immediate attention.
.Important: Reset the ASL light state and Motor Controller (MC)
status light after repairs a completed.
» Belt Rating
(Treadmills only)
menu: Maintenance > Belt Rating
Range: 10 - 0 (10 - New condition, 1 - Replace running belt)
On ASL equipped machines: A belt rating of 0 or 1 will cause a
blue pulsing ASL light indicating that there is a problem with the
running belt/deck and requires servicing or replacement.
Important: Reset the Belt Rating after replacing with a new run-
ning belt and deck (select Replace).
» Next Maintenance
Due
menu: Maintenance > Next Maintenance Due
Provides machine next maintenance due remaining mileage or
hours. Perform preventative maintenance when the maintenance
counter reaches 0.
Important: Reset the maintenance interval after completing
routine maintenance service, (select Reset). Treadmills reset to
1000 miles, ellipticals reset to 250 Hrs.
Active Status Light
(1)
(ASL) menu
menu: Maintenance > Active Status Light
Indicates the machine operating and maintenance status.
Blue Solid: Normal operation Indicates that the ASL has not
detected any logged error codes.
Blue Pulsing: Preventative maintenance reminder.
Treadmills: A belt rating of 0 or 1 will cause a blue pulsing ASL
light indicating that there is a problem with the running belt/deck
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 30
4 Standard Service Menus
Touchscreen Console Standard Service Menus

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Precor GEN06 Series and is the answer not in the manual?

Precor GEN06 Series Specifications

General IconGeneral
BrandPrecor
ModelGEN06 Series
CategoryTreadmill
LanguageEnglish

Related product manuals