Tension and Tracking Adjustment" on page 45 procedure.
17. Replace the belt guard cover ensuring the tabs are firmly locked into position on the
Take-Up roller shaft (see "End Cap & Belt Guard Cover Replacement" on the next
page).
18. Replace the end cap (see "End Cap & Belt Guard Cover Replacement" on the next
page).
19. Replace the hood cover.
20. Verify treadmill operation (see ) and return to service.
.See Also
"Replacement Procedures" on page 48
"Adjustment Procedures" on page 39
"Running Belt and Deck Replacement" on page 81
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 65
6 Replacement Procedures
Drive Roller Replacement
To Next Page
Loading...
Need help?
General
