27. Repeat the process on walking on the right side of the belt.
28. Repeat the process walking on the left side of the belt.
NOTE: It may be necessary to override the treadmill auto-stop function.
29. Stop the treadmill and step off the belt.
30. Set the treadmill to the maximum speed and run for 3 minutes.
NOTE: This process helps to remove excess wax from the belt.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 84
6 Replacement Procedures
Running Belt and Deck Replacement
To Next Page
Loading...
Need help?
General
