Precor P80 - P80 Console Workout Interaction

© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law Page 41
Test
Equipment
Description
Numeric
Backlight Test
All
1 Touch Numeric
Backlight Test
.
2 This tests the back lights of the lower display just above
the paddle controls. The back lights of the display will
illuminate in sequence in the Backlight Test and then
automatically exit to the
Systems Test
screen.
Numeric Display
Test
All
1 Touch Numeric
Display Test
.
2 This will test the numeric LCD display just above the
machine control levers. All the numeric characters will be
displayed in sequence and then automatically exit to the
Systems Tes
t.
Heart Rate
All
1 Touch
Heart Rate
.
2 Grasp both of the heart rate grips on the handlebar, the
heart rate will be displayed after a couple of seconds.
3 Use a wireless heart rate strap or wireless heart rate
simulator, the heart rate will be displayed after a couple of
seconds.
4 Touch 
BACK
to exit to
Systems Test
.
Step Count Reset
AMT12 Only
Note: Do this only when replacing the flat belts.
1 Touch Step
Count Reset
.
♦ The screen will display:
♦ Current total step count
♦ Step Count Reset
♦ Odometer Value at the last reset.
2 During this step it is necessary to pedal the AMT while the
Step Count is being reset, touch
START
.
♦ The Current Total Step Count will go to "0".
♦ The Step Count Reset will increment up.
♦ The Odometer will display the total miles recorded at the
time of the reset.
3 Touch 
BACK
to
System Tests
.
4 Touch  BACK to exit "System Tests" (back to "System Settings" menu).