SX™ Operator Manual
©
Original Printed in English
The machine requires regular, periodic maintenance
to ensure reliable service. No maintenance should be
performed unless the safety precautions for the
maintenance are thoroughly understood.
Follow all instructions in this manual for safe opera-
tion.
Follow all company and industry standard safety poli-
cies regarding this kind of machinery that may exceed
those listed in this manual.
Keep all safety features, guards, interlocks and sen-
sors in good working order.
EQUIPMENT SAFETY FEATURES
The Sharp SX is equipped with a polycarbonate shield
covering the Obstruction Sensing Jaw and Heated
Seal Wire.
DO NOT operated the unit with this feature re-
moved.
OBSTRUCTION SENSING JAW
The Sealing Assembly is equipped with Obstruction
Sensing Sensors, which can detect an obstruction in
the Sealing Area. If the Jaw Sensors detect and object
preventing the Jaw from closing, the Obstruction Sen-
sors de-energize and place the machine into a fault
condition.
A message appears in the display informing the Oper-
ator of the Jaw Fault, allowing the Operator to clear
the Sealing Area and reset the bagging cycle.
IMPORTANT SAFETY INFORMATION
SAFETY RULES & PROCEDURES
1-2
Always remove electrical power from the unit
prior to performing any service on the machine.
WARNING!
Do NOT operate or perform maintenance with
exposed long hair, jewelry or loose clothing as
these may get caught in machine. Failure to do
so could result in severe bodily injury or death.
WARNING!
The Sharp SX™ is equipped with Jaw Obstruc-
tion Detection Sensors. These sensors are not
designed, nor intended , to be a safety sensor.
WARNING!
To Next Page
Loading...
