Prestige APSRS - Page 10

APSRS_RevC_9/19
10
Detailed Descripons: Setup Opons
Keyless Control (Bank 2) (cont.) See page 21 for Programming Instrucon.
Feature 9: Valet Override Method
Not Available.
Feature 7: Nocaon Sounds
Not Available.
Feature 6: Automac Arming
Not Available.
Feature 5: Auto ReLock Seng
Funcon: Set the doors to re-lock if the system has been accidentally disarmed.
Seng Choices:
• Opon 1 - Auto ReLock is disabled.
• Opon 2 - If the system has been Unlocked but no doors have been opened in 3 minutes, the system will
relock the doors.
Feature 8: Horn Output Duraon
Funcon: Set the horn output to acvate for a set me.
Seng Choices:
• Opon 1 - Output pulses for 16 milliseconds.
• Opon 2 - Output pulses for 30 milliseconds.
• Opon 3 - Output pulses for 40 milliseconds.
• Opon 4 - Output pulses for 50 milliseconds.
• Opon 5 - Output pulses for 10 milliseconds.
Feature 12: Security Prole
Funcon: Set the system to funcon as a keyless entry / convenience system or entry alarm / convenience system.
Seng Choices:
• Opon 1 - All security trigger zones are disabled.
• Opon 2 - Door, Hood, and Trunk Trigger zones are Enabled.
• Opon 3 - All security zones are enabled: Doors, Hood, and Trunk will be bypassed for ve (5) seconds
with Ignion ON.
Feature 11: Silent Choice
TM
Funcon: Set audible beeps on or o when arming and disarming the system.
Seng Choices:
• Opon 1 - Pressing Lock or Unlock at any me will perform the funcon with audible beeps.
• Opon 2 - Pressing Lock or Unlock for 1.5sec on remote will control system without an audible beep.
• Opon 3 - First press of Lock or Unlock on the remote control will perform the funcon without an audible
beep. Second press within 10sec will result in audible beeps.
Feature 10: Driver Priority Unlock
Funcon: Set the behavior of unlock outputs when arming and disarming the system.
Seng Choices:
• Opon 1 - Unlock pulse will be on the Green wire unlock output only.
• Opon 2 - First press of unlock on remote will pulse Green wire ; Second press within 10sec will pulse
RED/BLACK wire.