Prestige APSRS - Page 11

APSRS_RevC_9/17
11
Keyless Control (Bank 2) (Cont.) See page 21 for Programming Instrucon.
Detailed Descripons: Setup Opons
Feature 14: Park Light / Trunk Relay Funcon
Funcon: Reverse the funconality of the trunk and park light outputs (i.e. when the built-in relay is needed for the
trunk connecon but not needed for the park light connecon.)
Seng Choices:
• Opon 1 - Funconality follows default sengs.
• Opon 2 - The Trunk Release Output (Dark Blue) wire works with the Parking Lights funcon; the Parking
Lights Input (White/Red) and Parking Lights Output (White) wires work with the trunk release funcon.
Feature 15: Data Bus (DBI) Port Protocol
Funcon: Set funconality of the data bus connector to accept integraon modules of diering protocols.
Seng Choices:
• Opon 1 - The data bus connector will be congured to work with modules that use the ADS Protocol.
• Opon 2 - The data bus connector will be congured to work with modules that use the DBI Protocol.
Feature 13: Door Trigger Input Detecon
Funcon: Set the system to detect 12-Volt (+) or Ground (-) when the vehicle door is opened
Seng Choices:
• Opon 1 - Door Trigger detecon is set for Ground (-).
• Opon 2 - Door Trigger detecon is set for 12-Volt (+).