32 Printing Using a Macintosh
Section 4: Printing Using a Macintosh
NOTE: You must set the Printer and Page Setup by clicking on these
buttons each time you print. You must perform these steps each time
you print even if what you see on the preview screen appears correct.
A. PRINTING ON A MAC FROM ADOBE ILLUSTRATOR
1. Create your document using the File - New command. Set
your Width and Height to correspond with the label stock
installed in the Printer.
2. Once your document is created and ready to print go to
File - Print. The following screen will appear. Before doing
anything else, click the Printer button to change the print
quality settings for this print.
To Next Page
Loading...
Need help?
General
