86
Chapter 3 OS Installation Using ServerStart
4 When a message prompts you to insert the OS CD-ROM, insert the CD-ROM
and click [OK].
For Windows 2000 / Windows Server 2003 / Windows Server 2003 x64
1. Insert the OS CD-ROM (Installation CD-ROM).
The License Agreement window appears.
2. Click [I agree].
After files are copied, a message prompts you to eject the CD-ROM and floppy disk.
For Windows Server 2003 R2 / Windows Server 2003 R2 x64
1. Insert the OS CD-ROM (Installation CD-ROM) Disc 1.
The License Agreement window appears.
2. Click [I agree].
Files are copied.
3. If a message prompts you to insert the Disc 2, eject the Disc 1 and insert the OS
CD-ROM (Installation CD-ROM) Disc 2.
After files are copied, a message prompts you to eject the CD-ROM and floppy disk.
5 Eject the CD-ROM and floppy disk and click [OK].
Then the system is restarted.
The system continues the installation operation after restart.
OS GUI setup, LAN utility installation, Service Pack installation, and Active Directory
installation are performed automatically.
6 When a confirmation message to restart appears, click [Restart].
The system restarts and installs high reliability tools.
7 When a message on installation completion appears, press any key.
8 Restart the system.
Click [Start] → [Shutdown]. Select [Restart] and click [OK].
The system restarts.
9 When the system restarts, log on to the server using the Administrator account
for the local computer.
The server setup and OS installation have been completed.
Refer to "Chapter 5 Operations after OS Installation" (
Jpg.135) and perform necessary procedures
before starting server operations.
To Next Page
Loading...
