Primes PowerLossMonitor PLM Series - Influence of hose lengths on time constants

16
Revision 01/2019 EN
PowerLossMonitor PLM
35,0(6
7.7 Cooling circuit connections on the PLM 40
Outside port diameter for PE hose 3/4inches
When fastening the coupling nut, make sure to use an open-end wrench AF36 to prevent the
screwing inside the housing from loosening.
Water connection
to absorber
Water connection
from absorber
Water connection
to chiller
Water connection
from chiller
Fig. 7.3: Water connections PLM 40
7.8 Influence of the hose lengths on the time constants for measuring devices with
external temperature sensor
The lengths of the hose connections have an influence on the time constants of the measuring
devices. Please only use the provided hoses at the positions marked with red arrows.
Water inWater out
External
temperature sensor
Absorber of the HP-MSM
Fig. 7.4: Cooling Circuit PLM 10 with external temperature sensor with the example of the HP-MSM