Princeton Instruments PI-MAX 3 System - Figure 39. Experiment Setup: Gain Selected; Figure 40. Repetitive Gating Setup: 100 Ns Width, 10 Ns Delay; Figure 41. Single Shot Result: Fluorescence Spot, 100 Ns Width, 10 Ns Delay

70 PI-MAX
®
3 System Manual Version 1.A
Figure 39. Experiment Setup: Gain Selected
Gate width and gate delay are set in such a way that the intensifier is gated ON during the
entire event (in this case the event is a 60 ns fluorescence).
Figure 40. Repetitive Gating Setup: 100 ns Width, 10 ns Delay
Figure 41 shows the result of the experiment. Figure 42 shows the peak obtained by
binning, in the vertical direction, the entire region around the fluorescence spot.
Figure 41. Single Shot Result: Fluorescence Spot, 100 ns Width, 10 ns Delay