161
Application > P-Series Setup > FF valid at TOF
The FF valid at TOF option determines whether the printer will perform a
Form Feed when the host sends a Form Feed command, if the printer is at
the top of form.
Will not perform a form feed when the host sends a
Form Feed and the printer is at the top of form.
Performs a form feed when the host sends a Form
Feed and the printer is at the top of form.
Application > P-SERIES XQ Setup
IMPORTANT The P-SERIES XQ Setup submenu will only be present when the LP+ Emulation
menu is set to P-SERIES XQ. Otherwise, this menu will be replaced with the LP+
Emulation menu.
IMPORTANT This LP+ emulation does not have any specific Character Group or Character
Set selection.
Application > P-Series XQ Setup > Horizontal DPI
This feature enables the thermal printer to print images as close as possible
to the same size as those originally programmed for a line matrix or laser
printer by selecting a horizontal resolution that matches that of the printer
that the file was originally generated for.
Although the range allows a selection of up to 400 dpi, the T800 is capable of
printing up to 203 dpi or 300 dpi horizontal resolution, depending on the print
head installed.
To Next Page
