Printronix Auto ID T820 - Memory; Media Cutter Option

237
Memory
Table 19. Memory Specifications
Flash Memory (standard)
128 MB soldered onto Controller PCBA
DRAM (standard)
128 MB soldered onto Controller PCBA
Media Cutter Option
Cutters are designed to cut tags and label liner. Avoid cutting through the
adhesive backed portion of any
media.
Cutting through perforate liner is not recommended. In addition, although the
cutter may operate with
synthetic, foil, and woven materials, application testing is encouraged to ensure reliable operation and to
assess cutter life.
Table 20. Cutter Specification
Typical Life
> 1,000,000 cuts
Warranty**
500,000 cuts
Environment
Same specifications as printer
Cutting Method
Guillotine
Media Thickness Range
0.06~0.19mm (0.00236~0.00748in)
Media Width Range
20~112mm (0.8~4.4in)
Media Length Range
25.4~1270mm (1.00~50 in.)
** Warranty is based on cutting label liner and paper based tag stock only. All
other materials (including
synthetic, foil, and woven materials) may reduce
cutter life to an indeterminate amount, even when they
are within the rated
media thickness specification. Qualification and life-testing is recommended for these
cutter applications.