This option specifies the user-selected Label Length.
In most applications,
the user-selected Label Length will match the physical
label length. Physical
label length is the actual label length of the media
installed:
Die-cut Labels: Measurable length of the removable label (leading edge to
trailing edge). This does not include the liner material or gap.
Tag Stock with notches or holes: Measurable length from the trailing
edge of
one notch or hole to the leading edge of the next notch or
hole.
Tag Stock with black marks on underside: Measurable length from
the
leading edge of one black mark to the leading edge of the next
black mark.
Continuous media (no label length indicators): Measurable length should be
within ± 1-2% the Label Length value here or the value sent via host software
command.
This menu can be overridden by the host job (Host
Form Length) and set to values that do not match
the physical length. For a full description of how
Label Length behaves, see the section Intro: Label
Length on page 59.
To Next Page
Loading...
