Printronix T5000 - Page 219

C/T PORT Submenus
219
ASCII Data Port
9100* 0-65535
(2)
Keep Alive Timer
3 Minutes* 2-10 Minutes
Ethernet Speed
DHCP
Disable* Enable
IPDS Data Port
(3)
5001* 0-65535
(2)
10 Full Duplex 100 Half DuplexAuto Select* 10 Half Duplex 100 Full Duplex
Notes:
* = Factory Default
1
Appears only if an Ethernet Network Interface Card (NIC) is installed.
2
Set the port number that works with your host system.
3
Appears only if the IPDS emulation is installed.
Job Control
Standard* Enhanced Off
ETHERNET
PARAMS
(1)
(cont. from
prev. page)