248
Chapter 5 Replacing The Printhead
Restore The Printer To Operation
1. Inspect the light brown area of the printhead for smudges or fingerprints.
If necessary, gently clean the light brown area with a soft, lint-free cloth or
a cotton swab moistened with isopropyl alcohol or a Cleaning Pen.
2. Install the ribbon and print media.
3. Close the pivoting deck and rotate the deck lock lever fully
counterclockwise. (See Figure 9.)
4. Close the media cover.
5. Plug the AC power cord into the printer and the power source.
6. Set the printer power switch to | (on).
7. Test printer operation and check print quality by selecting the
Diagnostics → Printer Tests menu and printing one of the test patterns.
(Refer to page 201.)
To Next Page
Loading...
