297
Sensed Distance Gap/Mark Sensor = Gap: The Sensed Distance
value is the physical length of one label plus the
length of one gap.
Gap/Mark Sensor = Mark: The Sensed Distance
value is the physical distance from the leading edge
of one black mark to the leading edge of the next.
Gap/Mark Sensor = Disable: Not applicable. If
Gap/Mark Sensor is set to Disable, the Sensed
Distance value will not be updated.
Slew Vertical paper movement.
Stop Bits The signal which indicates the end of a character or
element.
Thermal Transfer
Media Media specifically designed to work with a ribbon for
image transfer. In Thermal Transfer mode,
compatibility between the ribbon and the media is
critical in producing a high quality long lasting image.
Thermal Transfer
Printing A printing method in which the printhead presses a
specially coated ribbon against the media. The
printhead elements react with the ribbon and bond
the image to the media.
Twinax Twinaxial. A type of cable with two wires surrounded
by insulation and a braided shield.
To Next Page
