98
System > Flash File Edit > Overwrite Files
This allows you to prevent files from being overwritten by disabling the
overwrite function.
Disable
Files cannot be overwritten either from copying a file
from an SD card or by the host application.
Enable Files can be overwritten as needed.
Factory Default Enable
IMPORTANT
When files are overwritten, the FLASH used for the
original file is not truly deleted. Instead, that
memory goes to the Flash Reclaimable area and
cannot be used again until an Optimize & Reboot
is performed.
System > Flash File Edit > Delete Files
This allows the user to delete user files in FLASH memory.
File 1 File 1 is listed and will be deleted if selected.
…
File N File N represents the last user file in FLASH.
IMPORTANT
When files are deleted, the file cannot be used, but
the space cannot be used again until an Optimize
& Reboot is performed.
System > Flash File Edit > Available Space
Shows the user how much FLASH memory is available for new user files.
This does not count memory in the Flash Reclaimable area. This is a
read-only menu.
System > Flash File Edit > Flash Reclaimable
Shows the user how much FLASH memory is available to be reclaimed if the
user performs the Optimize & Reboot function. This is a read-only menu.
To Next Page
Loading...
