INTRODUCTION
UM-PSPC-06-E/10-2012 USER MANAUL PSPC Page 11 of 99
HOW TO USE THIS MANUAL?
The manual is constructed to provide a maximum amount of information with a minimum amount of
searching. The key to easy reference is the Table of contents. Familiarize yourself with it and you
won’t have any trouble locating information from any area of machine.
WHO SHOULD USE THIS MANUAL?
Owner:
The owner (contractor, concern) is the person that owns or hires the machine and puts this machine
into production. The owner must take care that the users of the system will read the manual.
Operator:
The operator is the person who operates the system as ordered by the owner. The operator must read
the chapters Introduction, Safety, Machine description, Operation.
Professional:
A professional is someone who can assess the duties appointed to him on account of his education,
knowledge and experience and who can assess the dangers attached, thereby avoiding these
dangers.
Maintenance engineer:
The maintenance engineer is the professional who is deemed qualified by the owner to perform
certain duties. The qualification only applies to those assigned duties. The maintenance engineer must
read the total manual.
MANUAL INFORMATION
Machine type: PSPC
Manual revision: 06 (October 2012)
SERIAL NUMBER
Each machine has a unique serial number printed on the machine tag, which can be found in the
electrical cabinet. Note down this serial number to have it available when contacting the Prinzen
service department.
To Next Page
Loading...
