Prinzen PSPC7 - Preventive Maintenance Instructions; Daily Maintenance Tasks

MAINTENANCE
Page 74 of 99 USER MANUAL PSPC UM-PSPC-06-E/10-2012
PREVENTIVE MAINTENANCE INSTRUCTIONS
DAILY MAINTENANCE
Daily Maintenance: Interval (hours):
h
1
Observe for abnormal sounds, vibrations and heat
8
2
Remove all dirt, grease and feathers from the system
8
3
Clean the drip trays with water (4x)
8
4
Clean the infeed conveyor with a moistened cloth.
8
5
Drain off water separator air regulator
8
6
Dap the optional stamps with a paper towel.
8
TIP!
Depending on your specific production
circumstances dab the stamps with a paper
towel before, during and after using the
stamping unit.
TIP!
Do not store the stamps and ink into a room
with a temperature below 12ºC. Below this
temperature, the ink becomes syrupy
resulting in bad coding on the eggs.
1
2
3 3 3 3
4
5 5
6 6