MAINTENANCE
Page 70 of 99 USER MANUAL PSPC UM-PSPC-06-E/10-2012
GENERAL
Only professionals who are familiar with the installation and its operation may perform maintenance,
cleaning, repairs and replacement of defective or worn out parts.
When during maintenance questions arise regarding the condition of the system, consult your Prinzen
dealer.
In case of difficult or special repairs consult your Prinzen dealer.
Inspections must be carried out before, during and after operation of the machine. Mechanical flaws,
such as loose bolts and ball bearings must be repaired upon discovery.
The operator is responsible for noticing and locating abnormal noises and other unusual signs
indicating flaws. If the operator cannot locate the flaw, he must stop the installation and inform his
superior.
Take preventive actions against vermin as they may cause failures to the electrical cables and such.
SAFETY REGULATIONS
Before starting operation, cleaning, maintaining the system or before remedying breakdowns first read
the chapters Introduction and Safety.
MAINTENANCE UTENSILS
In general we advise to have the following tools available for maintenance of the Prinzen systems:
- Padlock.
- Vacuum cleaner.
- Compressed air.
- Plastic scraper.
- Moistened cloth
- Water and neutral soap.
- Lubricants.
- Set of Allen keys.
- Set of wrenches.
- Set of screwdrivers.
To Next Page
Loading...
