Process Technology Lufran LUF Series - Model Number

7
M-43-25 LUF-Series Lufran Manual
Revision - Date 03-01-04-18 Standard outlet, Standard Interface
Engineering Information (Continued):
System Specifications (Continued):
RoHS (3) Compliance Table
• Lead (Pb): < 1000 ppm
• Mercury (Hg): < 100 ppm
• Cadmium (Cd): < 100 ppm
• Hexavalent Chromium (Cr VI): <
1000 ppm
• Polybrominated Biphenyls
(PPB): < 1000 ppm
• Polybrominated Diphenyl Ethers
(PBDE): < 1000 ppm
• Bis (2-Ethylhexyl) Phthalate
(DEHP): < 1000 ppm
• Benzyl Butyl Phthalate (BBP): <
1000 ppm
• Dibutyl Phthalate (DBP): < 1000
ppm
• Diisobutyl Phthalate (DIBP): <
1000 ppm
Model Number:
Process Technology model numbers are designed to offer some description of the heater construction,
including features and options. The model number can be found on the model/serial number label located
directly above the operator interface screen. Refer to figure 33 (page 41) to see the location of this label.
Assembly
Control
Circuit
Power
Circuit
Enclosure
Fasteners
Lead
O
O
O
O
O
Mercury
O
O
O
O
O
Cadmium
O
O
O
O
O
Hexavalent
Chromium
O
O
O
O
O
Polybroinated
Biphenyis
O
O
O
O
O
Polybrominated
Diphenyl Ethers
O
O
O
O
O
Bis (2-
Ethylhexyl)
Phthalate
O
O
O
O
O
Benzyl Butyl
Phthalate
O
O
O
O
O
Dibutyl
Phthalate
O
O
O
O
O
Diisobutyl
Phthalate
O
O
O
O
O
O indicates that this toxic or hazardous substance contained in the omogenous material for
this part, according to the EIP-A, EIP-B,-EIP-C is below the limit requirement listed in
SJ/T11363 2006.
X indicates that this toxic or hazardous substance contained in the omogenous material for this
part, according to the EIP-A, EIP-B,-EIP-C is above the limit requirement listed in SJ/T11363
2006.