Web and MAC Authentication
Configuring Web Authentication
ProCurve(config)# show port-access web-based
Port Access Web-Based Status
Auth Unauth Untagged Tagged Port
Port Clients Clients VLAN VLANs COS
----- -------- -------- -------- ------ --------
1 1 1 4006 Yes 70000000
2 2 0 MACbased No Yes
3 4 0 1 Yes No
Figure 3-6. Example of show port-access web-based Command Output
Syntax: show port-access web-based clients [port-list]
Displays the session status, name, and address for each web-
authenticated client on the switch. The IP address displayed
is taken from the DHCP binding table.
If a web-authenticated client uses an IPv6 address, n/a - IPv6
is displayed.
ProCurve(config)# show port-access web-based clients
Port Access Web-Based Client Status
Port Client Name MAC Address IP Address Session Status
----- ------------ ------------- --------------- -------------
1 webuser1 0010b5-891a9e 192.192.192.192 Authenticated
1 webuser2 001560-b3ea48 n/a - no info Authenticating
1 webuser3 000000-111111 n/a - IPv6 Authenticating
3 webuser4 000000-111112 n/a Authenticating
Figure 3-7. Example of show port-access web-based clients Command Output
3-40
To Next Page
Loading...
