Web and MAC Authentication
Configuring Web Authentication
Syntax: show port-access web-based clients <port-list> detailed
Displays detailed information on the status of web-
authenticated client sessions on specified switch ports.
ProCurve(config)# show port-access web-based clients 1 detailed
Port Access Web-Based Client Status Detailed
Client Base Details :
Port : 1
Session Status : authenticated Session Time(sec) : 6
Username : webuser1 MAC Address : 0010b5-891a9e
IP : n/a
Figure 3-8. Example of show port-access web-based clients detailed Command Output
3-41
To Next Page
Loading...
