PROLiNK® PRC2401U Wireless AC2600 MU-MIMO Dual-Band Gigabit Router
43
Dynamic IP (DHCP)
• Host Name: Refer to your ISP for the detail. Some ISP required for the hostname. This setting
is optional and can be leave blank if you are unsure.
• Primary DNS Server: Set the Primary DNS Server IP Address. Detail information can be
acquired from ISP. This setting usually will be obtained automatically from ISP.
• Secondary DNS Server: Set the Secondary DNS Server IP Address. Detail information can be
acquired from ISP. This setting usually will be obtained automatically from ISP.
• MTU: By default MTU (Maximum Transmission Transmission Unit) is set to Auto. Select to
Manual if you would like to set the MTU for the optimal performance with your ISP.
• MAC Address Clone: By default MAC Address is configure to the WAN Port’s of physical
interface of the MAC address on the router. The MAC Address could be change with the MAC
Address of a connected client.
To Next Page
Loading...
