Prolon VC2000 Series - Page 90

2.2.1 - Calculate Supply Setpoint Using “Demand”
By setting “Calculate Supply Setpoint using Demand”, the target discharge temperature in the supply will be reset based on the
demand coming from a Math function (in this case, source Math 1). See SECTION 3.2 for more details on the Math functions.
2.2.2 - Calculate Supply Setpoint Using “Fixed”
Bysetting“CalculateSupplySetpointusingFixed”,thetargetdischargetemperatureinthesupplyisxed,andwillnotvary.
Supply Setpoint
Demand
66
• Choose how to calculate the Supply Temperature according to the following options:
> Demand (default)
> Fixed
> Outside Temp (i.e. outside temperature reset)
> Return Temp (i.e. return temperature reset)
9-11