Prolon VC2000 Series - User Manual

Information about Prolon, its founding, and product focus.

Explains application-specific controllers, stand-alone/networked operation, and software.

Details various Prolon controllers, sensors, and adapters.

Illustrates how Prolon controllers connect in a network topology.

Defines the roles of Master and Follower controllers in a network communication.

How controller placement and connection affect functionality within the network.

Explains the INT and NET communication bus structures and port availability.

Details acceptable and unacceptable RS-485 network wiring configurations (daisy chain).

Explains that master location is irrelevant in a daisy chain if layout is respected.

Guidelines for assigning unique addresses to controllers for successful network communication.

Details I/O terminals and network information for VC2000 and C1050 VAV controllers.

Details I/O terminals and network information for digital wall sensors and thermostats.

Details I/O terminals and network information for various M2000 and C1050 unit controllers.

Detailed wiring diagrams for single M2000, single C1050, and master NC2000 panels.

How to connect temperature sensors, dry contacts, and active signal transmitters to controllers.

How to configure analog input signal modes using jumpers on controllers.

Explains the use of TERM and BIAS jumpers for RS485 network stabilization.

How to assign addresses to different Prolon controllers for network communication.

Recommended wiring types and practices for Prolon system connections.

Safety checks, power supply, addressing, and grounding procedures before powering up.

Explains the function, setup, and operation of the PL-TREE-COM wireless device.

How to configure the channel number for TREE-COM modules using dipswitches.

Details the operational range and best practices for aligning TREE-COM modules.

Explanation of the status indicator LEDs on the PL-TREE-COM module.

How to set bias and terminating resistors on the PL-TREE-COM module for network stability.

Information on firmware compatibility requirements for controllers using TREE-COM modules.

Various scenarios for connecting TREE-COM modules in wireless networks.

How to measure wireless signal quality using NFC and the Prolon Focus app.

Step-by-step guides for measuring signal quality on Android and iOS devices.

Best practices for improving communication with low signal quality using Focus PC software.

Describes methods for connecting a computer via IP, USB, and PL-485-BT interfaces.

Guide to accessing and using the Prolon Focus software for system management.

Step-by-step guide for manually configuring zoning systems in Prolon Focus.

Procedures for testing system operation, adjusting dampers, and verifying cooling/heating.

How to set schedules, rename zones, and manage system configurations within Focus.

Explains Variable Air Volume (VAV) and Changeover Bypass (VVT) system principles.

Step-by-step guide for setting up VVT systems, including demand, voting, and math functions.

Step-by-step guide for setting up VAV systems, including cooling stages and supply setpoints.

Detailed explanations and examples of proportional, integral, and math function calculations.